For this post of my Tool Review series, I wanted to focus on a tech product. Even though there is a lot of art you can get from this one, it´s perse a high-tech piece. I had previously written an article about my first tablet and read about my HUIÓN Inspiroy H640-P. So, we can consider Trying HUION Kamvas GT-191 as the next chapter.

General knowledge
Firstly, as General knowledge, you must know that tablet like this is a peripheral device to operate the computer. Then It is equivalent to a mouse, a touchpad, or a joystick. The difference is that you use the pen on a screen to control the computer. So, you do not require any special software or an operating system to use it. Also, you can run any software on your computer with the limitations and/or advantages that the pencil implies.
The HUION KAMVAS GT-191 is also a 19″ screen. When you share it with the computer becomes a second screen of your system. You can also use it split or mirrored, It will depend on your work preference. That is to be said that this device is not autonomous, it is not a computer or an iPad. You need to connect it to a computer to work, either a Mac or a Pc will work.

The Hardware
Firstly, you should consider that these Display models require a series of connections in addition to a USB connector.
The Screen tablets require;
- Connection to electricity, so it comes with a cable with an external transformer. Its power consumption is as high as that of the computer itself so it requires an independent power source.
- Data connection, which is transmitted via USB cable connected to the computer.
- Video connection, which uses HDMI technology.
Tips
That is to be said, as a tip, that this equipment comes with all the necessary cables to work. However, you must make sure you have the correct video port. So, if you do not have an HDMI port on your computer, you will need to buy a converter or a cable that connects the tablet to the video technology that you have. In my case, I had to buy a converter in the local market. While I got the international shipment of the appropriate cable.


Another thing to consider is that the pen for the HUION Kamvas GT-191 uses batteries, so you need to charge it. Eventually, it will be useful to use an extra USB port. So as Tip I recommend you buy a USB hub to expand the USB port capability of your system. You will get a second Pen as a Gift inside the box. So don´t worry about running out of battery in the middle of a session. It is supposed that you will always have the spare pen charged, won’t you?

Installing
Before making the decision to purchase this equipment I read a lot of reviews online. Then I noticed that several of them complained about the discomfort caused by the cables. Certainly, there are many cables, the installation is a bit bulky. Not only because of cable quantity but also because of the angle of access to the tablet. Since the access is in its back/bottom, it is angled, and uncomfortable. The cables can be stepped on by the rear supports of the equipment making it unstable.


As you can see in the image, I easily solved the issue by installing them through the base. You can also see the angled mark on the video cable near the connector to the base of the tablet. A design flaw they will surely correct.
Once I correctly installed the hardware, I notice that it was sufficiently robust and stable to work on. The tilt of the screen is adjustable, from 13 ° to 90 °, and maintains its stability in all positions.

The Software
The tablet does not come with any pre-installed software or a CD. It is necessary to go to the HUION website where you will find the most updated driver. The procedure is the traditional driver download and install. Once installed the tablet takes some time to be recognized. So I had to reboot a couple of times for it to work. Once it happened I had no more problems with it.
The software which I have been using intensely is the SketchBook PRO. It is what I have found more similar to the experience I am used to. About it and about my Sketch Digital experience I will post soon.
The experience
With my previous tablet, I had to make great efforts. A lot of practice and being constant were necessary to master the stroke. I used these images that I got from a tutorial to develop the technique and control. The goal is to naturally connect the dots in different directions. Also, you have to write between the lines and follow the trace of the figures. Like a kid learning to write again.



It was not easy, to be honest. But it may be different for everyone, for instance, I gave away my previous tablet to my 10-year-old son. He mastered it in days using the same practice images. It’s not to be feared. Once the control was achieved I felt like it was possible to move forward and improve the results with a better tool. That’s when I decided to purchase this tablet.
There is a small gap between the LCD screen and the touch screen that generates a certain parallax error. That leads you to be inaccurate in some cases. However, it is something that over time you learn to estimate without even thinking. In any case, it will always be the blessing of the digital gods called The UNDO.

Mi way
The best way that I have managed to have the tablet on my desk is right below the monitor and above the keyboard. Then it is not a shared screen from left to right but from top to bottom. That way I can drag an image from my main desktop on the iMac to the tablet at any time. Then I quickly start scratching over it. To make this possible it is necessary to move the tool dock from the bottom to the side of the main screen. This is useful for those moments in which a quick solution is needed and requires freehand design creativity.
The Tablet is incredibly useful for live sessions with my clients via Skype. With them, I share my desktop so they can see the creative process live. That way I can easily communicate my design vision. Maybe we are browsing a virtual model together and when noticing a missing detail, the client might request an alternative. Then, with a screenshot, I take it quickly to the tablet, whose screen is also shared with them. Now, I do live sketches to interact with the customer´s feedback, all super-fast, fluid, efficient, and even fun.

At the bottom of this article, I share a very short video that showcases my daily workflow for me.
Conclusion
As you can see I am totally satisfied with my Tablet. Trying HUION Kamvas GT-191 has been a great idea. I also believe that I have achieved the best value for money. All these features in a brand like Wacon would have cost me thousands of dollars. Some extra features that I would like to have would be quick buttons on the tablet and touch screen. That way a could zoom and pan directly with my fingers as if it were an iPad. Then I could completely dispense with the keyboard during Sketch sessions.
I got caught by the digital drawing. The change was exponential, dominating the stroke, and understanding the SketchBook PRO tools made me understand that letting creativity flow would make me obtain better results. The response is super fast, the latency is minimal. I understand that more advanced models even recognize the tilt of the pen on the screen, which is great. Anyway, that is not a feature without which you can not live.
It seems that there is never enough screen when it comes to drawing. This is 19 “and it is quite comfortable, but a 21” would not hurt at all! Maybe in a year, I’ll be doing the third part of this post with a brand new device 😉

Leave in the comments your questions or share your own experience. Thanks for the support!
Probando HUION Kamvas GT-191 – Español
Para esta publicación de mi serie de Tool Review la quise romper con la línea de productos artísticos. Voy a dedicarlo a un producto de corte tecnológico. Aún cuando es bastante el arte que se puede lograr con esta herramienta, no deja de ser una pieza de alta tecnología.
Anteriormente había escrito un articulo sobre mi primera tableta. En este link puedes leer sobre mi experiencia con la Inspiroy H640-P de HUION. Así que este artículo se puede considerar como la continuación de aquella experiencia.

Generalidades
Debes saber que una tableta es un dispositivo periférico para manejar el computador. Es equivalente a un mouse, un touch pad o Joystick. Su diferencia es que se utiliza un lápiz sobre una pantalla para controlar al computador. Es decir que no requiere de ningún software especial o un sistema operativo. Con ella puedes usar todos los programas de tu computadora con las limitaciones y/o ventajas que implique el lápiz. La HUION KAMVAS GT-191 es además una pantalla de 19” que al ser compartida con la computadora se convierte en una segunda pantalla de tu sistema o un espejo de la pantalla principal. Según sea tus necesidades de trabajo. Este dispositivo tampoco es autónomo. No es un computador o un iPad, requiere de ser conectado a un computador para funcionar.

El Hardware
Lo primero que debes tomar en cuenta es que, a diferencia de las tablets tradicionales, estos modelos Screen requieren de una serie de conexiones además del conector USB.
Las tablets Screen requieren;
- Conexión a la electricidad, por lo que trae un cable con un transformador externo. Su consumo eléctrico es tan alto como el de la computadora misma, así que requiere su fuente de poder independiente.
- Conexión de data, que es transmitida con un cable USB conectada a la computadora.
- Conexión de video, que utiliza tecnología HDMI.
Este equipo viene con todos los cables necesarios para funcionar. Sin embargo como Tip, debes asegurarte de tener en tu computadora puerto de video correcto. Si no cuentas con un puerto HDMI, compra un convertidor o un cable que conecte la tableta a la Tecnología de video que dispones. En mi caso tuve que comprar un convertidor en el mercado local, mientras llegaba la compra internacional del cable adecuado.


Otra cosa a tener en cuenta es que la lápiz para el HUION Kamvas GT-191 requiere que de ser cargado. Eventualmente, será necesario usar un puerto USB adicional. Por eso como Tip te recomiendo comprar un USB hub para ampliar la capacidad de puertos USB de su sistema. Recibirás un segundo bolígrafo como regalo dentro de la caja. Así que no te preocupes por quedarte sin batería en medio de una sesión. Se supone que siempre tendrás el bolígrafo de repuesto cargado. ¿no es así?

Instalando
Antes de tomar la decisión de adquirir este equipo lei muchos reviews en línea. Noté que varios de ellos se quejaban de lo incomodidad causado por los cables. Ciertamente son muchos cables, la instalación queda un poco aparatosa. No solo es la cantidad de cables. Se trata además del ángulo de acceso de los cables a la tablet en su parte posterior/inferior es angulada, incómoda. Los cables pueden ser pisados por las patas posteriores del equipo haciéndolo inestable.
Como pueden ver en la imagen creo que se soluciona fácilmente instalándolos por dentro de la base. En la foto puedes también ver la marca en ángulo en el cable de video. Se forma por lo cerca del conector a la base de la tablet. Un defecto de diseño que seguro sabrán corregir.

Una vez instalada correctamente el hardware se puede notar que es suficientemente robusta y estable. La inclinación de la pantalla es ajustable. Se gradúa desde los 13° hasta los 90° y mantiene su estabilidad en todas las posiciones.
El Software
La tablet no viene con ningún software preinstalado, tampoco un CD. Es necesario ir a la web de HUION donde encontrarás el driver más actualizado. El procedimiento es el tradicional de descarga e instalación de drivers. Una vez instalado cuesta un poco para que la tablet sea reconocida. Tuve que reiniciar la computadora un par de veces para que la reconociera. Pero una vez que lo hizo no tuve más problemas al respecto.
El software con el que he estado trabajando intensamente es el SketchBook PRO. Es lo que he conseguido más parecido a la experiencia en físico a la que estoy más acostumbrado. Sobre él y mi experiencia del Sketch Digital haré un post proximamente.
La Experiencia
Sobre La Experiencia puedo decir que con mi tableta anterior tuve que hacer grandes esfuerzos. Tuve que practicar y ser constante para dominar el trazo. De hecho, utilicé estas imágenes que conseguí en algún tutorial para desarrollar la técnica y el control. El objetivo es conectar naturalmente los puntos en diferentes direcciones, escribir entre líneas y seguir el trazo de las figuras. Como un niño que aprende a escribir de nuevo.



No fue fácil, para ser honesto, pero puede ser diferente para cada quien. Por ejemplo, le di mi tableta anterior a mi hijo de 10 años, él la dominó en días. Incluso usando las mismas imágenes de práctica que yo. Así que no es algo para temer. Una vez que logré el control, sentí que era posible avanzar y mejorar los resultados con una mejor herramienta. Entonces fue cuando decidí comprar esta tableta.
La HUION KAMVAS GT-191 es súper precisa. Cuenta con una precisión que hace que los trazos respondan ante la más mínima diferencia de presión. Tal cual si se tratara de la herramienta que virtualmente esté usando; pinceles, lápices, marcadores, etc. Ademas que cada pincel es perfectamente ajustable a las preferecias personales. La respuesta es super rápida, la latencia es mínima. Entiendo que modelos más avanzados reconocen incluso la inclinación del lápiz sobre la pantalla, lo cual es genial. Pero, no es una característica sin la que no se pueda vivir.

Existe un espacio entre la pantalla de LCD y la pantalla táctil. Se genera cierto error de paralaje que te lleva a ser impreciso en algunos casos. Sin embargo es algo que con el tiempo se aprende a estimar sin siquiera pensarlo. En todo caso estará siempre la bendición de los dioses digitales llamada UNDO.
A mi manera
La mejor manera que he conseguido para disponer de la tablet es justo debajo del monitor y encima del teclado. Entonces, puedo arrastrar una imagen de la iMac a la tableta en cualquier momento. Asi puedo comenzar a rayar rápidamente sobre sobre ella. Para que ello sea posible es necesario mover el Dock de herramientas al lateral de la pantalla principal. Esto es muy útil para se requiera de creatividad y la libertad del diseño a mano alzada.

La Tablet es increíblemente útil para las sesiones en vivo con mis clientes vía Skype. Con ellos comparto mi escritorio y pueden ver el proceso creativo en vivo, puedo fácilmente comunicar mi visión de diseño. Quizás estemos navegando un modelo virtual juntos y al notar algún detalle solicita una alternativa. Entonces, con solo una captura de pantalla lo llevo rápidamente a la tablet, cuya pantalla también se comparte vía Skype. Allí hago sketches en vivo interactuando con feedback del cliente, todo súper rápido, fluido, eficiente y hasta entretenido.
Acá les comparto un cortísimo video que ejemplifica un flujo de trabajo cotidiano para mi.
Conclusion
Como puedes ver estoy totalmente satisfecho con mi HUION Kamvas GT-191. Además creo que he conseguido la mejor relación precio valor. Todas estas especificaciones en una marca como Wacon me habrían costado miles de dólares. Algunas características extras que me gustaría tener serían botones de acceso rápido en la tableta y touch screen. Con ellos podría hacer zoom y paneo directamente con los dedos como si se tratara de un iPad. Así podría prescindir completamente del teclado durante las sesiones de Sketch.

Me atrapó el dibujo digital, el cambio fue exponencial. Dominar el trazo y comprender las herramientas de SketchBook PRO me hizo entender que dejando fluir la creatividad obtendría mejores resultados.
Pareciera que nunca es suficiente pantalla cuando se trata de dibujar. Esta es de 19” y es bastante cómoda, pero una de 21” no me caería nada mal! Quizás dentro de un año estaré haciendo la tercera parte de este post con un nuevo dispositivo 😉
Si tienes preguntas, opiniones o quieres compartir alguna experiencia al respecto, hazlo en los comentarios, Gracias por el apoyo!